Untitled
phoneSupport:
+612 4587 9888
Untitled
phoneSupport:
+612 4587 9888
Untitled

PRIMERS

fullscreen fullscreen_exit done_all launch
Hot Vulc Metal Primer 1L BIR-1086
zoom_in
Hot Vulc Metal Primer 1L
BIR-1086
check_box_outline_blankShow Comparison

Hot Vulc Metal Primer EP520 is a general purpose, high performance hot vulcanisation bonding agent that will bond a wide variety of elastomer compounds to metal or other substrates.

Hot Vulc Metal Primer can be used as both a single coat bonding agent or as a two coat system applied with Chemvulc Metal Primer.

As a single coat bonding agent or as a tie coat (cover cement) over Chemvulc Metal Primer, Hot Vulc Metal Primer will bond compounds based on Natural Rubber (NR), Isoprene Rubber (IR), Styrene-Butadiene Rubber (SBR), Butadiene Rubber (BR), Chloroprene Rubber (CR), and Nitrile Rubber (NBR) to metals such as carbon and alloy steels, stainless steel, aluminium, copper and copper alloys, magnesium, zinc, etc.


BENEFITS

One Coat  - Hot Vulc Metal Primer is an excellent one-coat bonding agent which means reduced labour, reduced solvent usage and VOC emissions, reduced inventory and reduced shipping costs.

Two Coat - In conjunction with Chemvulc Metal Primer.  Hot Vulc Metal Primer gives rubber tearing bonds and outstanding environmental resistance.  Our recommended system of bonding.

Convenience - Hot Vulc Metal Primer is suitable for existing production lines as it may be applied by brush, dip, or spray methods.

Low Lead content - Hot Vulc Metal Primer has a low content of inorganic lead for good under bond corrosion resistance.

Metal Primer 1Ltr BIR-1080
zoom_in
Metal Primer 1Ltr
BIR-1080
check_box_outline_blankShow Comparison
For use with hot and cold vulcanisation of rubber to metal substrate.  Metal surface must be sandblasted and free of any contamination prior to application.  Metal Primer can be applied by spray or brush application. Can be used with CV2002, CV4000 or CV3000 for cold vulcanisation or use with Chemvulc Hot Vulc Metal Primer for hot vulcanisation of rubber to metal.
Metal Primer 5Ltr BIR-1081
zoom_in
Metal Primer 5Ltr
BIR-1081
check_box_outline_blankShow Comparison
For use with hot and cold vulcanisation of rubber to metal substrate.  Metal surface must be sandblasted and free of any contamination prior to application.  Metal Primer can be applied by spray or brush application. Can be used with CV2002, CV4000 or CV3000 for cold vulcanisation or use with Chemvulc Hot Vulc Metal Primer for hot vulcanisation of rubber to metal.
Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.