Untitled
phoneSupport:
+612 4587 9888
Untitled
phoneSupport:
+612 4587 9888
Untitled

ADHESIVES

fullscreen fullscreen_exit done_all launch
Plasto Cement 250ml Set Boxed BIR-10202250
zoom_in
Plasto Cement 250ml Set Boxed
BIR-10202250
check_box_outline_blankShow Comparison

Plasto Cement is a two part PVC cement for use on PVC conveyor belts.  Plasto Cement can be used for both hot and cold splicing of PVC belts. 

Plasto Cement is a heavy duty adhesive for PVC sheeting and is suitable for use in marine applications for the repair of PVC rubber inflatable boats.

CV2002 Cement 250ml Set Boxed BIR-10200250
zoom_in
CV2002 Cement 250ml Set Boxed
BIR-10200250
check_box_outline_blankShow Comparison

Chemvulc Cold Vulcanising Cement CV2002 is multi-application adhesive cement for many industrial rubber bonding requirements. CV2002 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment.

CV2002 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV2002 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV2002.

Smaller kit size for convenient use for small repairs where heavy duty adhesive is required.  This product is also suitable for Marine use and can used for the effective repairs to Hypalon rubber inflatable boats. 

CV4000 800gm Set BIR-10201N
zoom_inchevron_leftchevron_right
CV4000 800gm Set
BIR-10201N
check_box_outline_blankShow Comparison

Chemvulc Cold Vulcanising Cement CV4000 is multi-application adhesive cement for many industrial rubber bonding requirements. It is a more environmentally friendly adhesive system than CV2002. CV4000 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment. Note that CV4000 is flammable, ensure that if a non-flammable application is required, then use CV2002.

CV4000 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV4000 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV4000.

Plasto 800gm + Hardener BIR-10202
zoom_in
Plasto 800gm + Hardener
BIR-10202
check_box_outline_blankShow Comparison

Plasto Cement is a two part PVC cement for use on PVC conveyor belts.  Plasto Cement can be used for both hot and cold splicing of PVC belts. 

Plasto Cement is a heavy duty adhesive for PVC sheeting and is suitable for use in marine applications for the repair of PVC rubber inflatable boats.

CV2002  White Cement 1 Ltr BIR-10200W1
zoom_in
CV2002 White Cement 1 Ltr
BIR-10200W1
check_box_outline_blankShow Comparison

Chemvulc Cold Vulcanising Cement CV2002 is multi-application adhesive cement for many industrial rubber bonding requirements. CV2002 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment.

CV2002 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV2002 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV2002.

CV2002 1kg Set + Hardener BIR-10200
zoom_in
CV2002 1kg Set + Hardener
BIR-10200
check_box_outline_blankShow Comparison

Chemvulc Cold Vulcanising Cement CV2002 is multi-application adhesive cement for many industrial rubber bonding requirements. CV2002 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment.

CV2002 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV2002 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV2002.

CV3000 Cement 800gm Set BIR-10203800
zoom_in
CV3000 Cement 800gm Set
BIR-10203800
check_box_outline_blankShow Comparison

Chemvulc Cold Vulcanising Cement CV3000 is multi-application adhesive cement for many industrial rubber bonding requirements. It is a more environmentally friendly adhesive system than CV2002. CV3000 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment. Note that CV3000 is flammable, ensure that if a non-flammable application is required, then use CV2002.

CV3000 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV3000 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV3000.

CV3000 is formulated with an increased curing time for applications with large surface areas.

Plastopang Kit BIR-1090F/QTS
zoom_in
Plastopang Kit
BIR-1090F/QTS
check_box_outline_blankShow Comparison

Plastopang cold-bonding PVC Liquid Cement is excellent for splicing conveyor belts and for fabrication of PVC and Polyurethane belts, such as bonding V-guides, cleats, and edge walls. Clear cement

  • Oil resistant
  • Can bond PVC and soft-durometer urethanes to metal or rubber
  • When bonding to metal, Pang Metal Primer should be used
  • Available in: Quart, Gallon

USE WITH ACTIVATOR
Plastopang must be used with PANG Activator, designed for two-part cold bonding cements. PANG Activator is available in 30cc.

CV2002 5 Litre Set BIR-102005
zoom_in
CV2002 5 Litre Set
BIR-102005
check_box_outline_blankShow Comparison

Chemical Vulcanising Systems Cold Vulcanising Cement CV2002 is multi-application adhesive cement for many industrial rubber bonding requirements. CV2002 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment.

CV2002 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV2002 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV2002.

Chemblack 20 Litre BIR-1036
zoom_in
Chemblack 20 Litre
BIR-1036
check_box_outline_blankShow Comparison
Chemblack black vulcanising cement is a high quality vulcanising cement for hot vulcanising of rubber products. It is used for hot splicing of rubber conveyor belts in conventional vulcanisers.
Refer to Chemblack spec sheet in downloads
CV2002 White 250ml box cement BIR-10200W250
zoom_in
CV2002 White 250ml box cement
BIR-10200W250
check_box_outline_blankShow Comparison

Chemvulc Cold Vulcanising Cement CV2002 is multi-application adhesive cement for many industrial rubber bonding requirements. CV2002 cement plus hardener is the adhesive for bonding natural rubber, neoprene rubber, SBR rubber and other rubbers to each other, fabric and to steel without the aid of heat, pressure or special equipment.

CV2002 is a two component, chloroprene based adhesive when catalysed with the correct amount of Hardener, will vulcanise at room temperature. CV2002 has a wide scope of applications in bonding rubber to rubber, rubber to fabric, rubber to metal as well as rubber to concrete, fiberglass and urethane. It is also used in the splicing and repair of fabric conveyor belting. Repair to existing rubber lined vessels and rubber components are also recommended uses for CV2002.

Smaller kit size for convenient use for small repairs where heavy duty adhesive is required.  This product is also suitable for Marine use and can used for the effective repairs to Hypalon rubber inflatable boats. 

Chemblack 200 Litre BIR-1035
zoom_in
Chemblack 200 Litre
BIR-1035
check_box_outline_blankShow Comparison
Chemblack black vulcanising cement is a high quality vulcanising cement for hot vulcanising of rubber products. It is used for hot splicing of rubber conveyor belts in conventional vulcanisers.
Refer to Chemblack spec sheet in downloads
A&B Compound 1kg Set BIR-1090
zoom_in
A&B Compound 1kg Set
BIR-1090
check_box_outline_blankShow Comparison
Two component repair compound. Filler for small flaws and damaged areas in rubber components.
A&B Compound 2kg Set BIR-1091
zoom_in
A&B Compound 2kg Set
BIR-1091
check_box_outline_blankShow Comparison
Two component repair compound. Filler for small flaws and damaged areas in rubber components.
Plastopang Activator BIR-1090F
zoom_in
Plastopang Activator
BIR-1090F
check_box_outline_blankShow Comparison
Pangofol products must be used with PANG Activator, designed for two-part cold bonding cements. PANG Activator is available in 30cc.
Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.